Download and setup MSlice
Download Mslice
Matlab Versions
Windows | Linux | MacOS |
---|---|---|
Recent working release (32 and 64 bit version): (that is what you probably want) The release is supplied with working 32 and 64 bit mex files for Windows and 32-bit Linux (built for Ubuntu 9.04) and has been tested against Matlab 2008a and above. It should work with any Matlab using mex files. In case of a problem or unsupported version you should look for "How to MEX MSlice"
Matlab Ver 7.1; Matlab 2006a;Matlab 2006b; Matlab 2007a; Matlab 2007b |
Download one of the versions and see "How to MEX MSlice". |
Download one of the versions and see "How to MEX MSlice". |
Standalone Versions
Set Up
Matlab Version
- Unpack this file into C:\mprogs or a directory of your choice eg X:\ISIS
- Open your startup.m file (if it does not exist, then type
>>edit startup.m
in the matlab window immediately after matlab started or save this file in the folder where matlab starts)
- Add the following lines to the startup.m file
addpath('c:\mprogs\mslice') % where c:\mprogs\mslice is the folder you unzipped mslice into mslice_init
Standalone Version
Unpack the archive into the directory of your choice keeping the structure of folders you find within the archive.
Before using a MATLAB compiled product you must run MCRInstaller.exe. This .exe file installs required components of MATLAB on your computer. Admin rights are required to run this and it must be run the first time you download a standalone matlab application. If you have already run this file on your computer, you do not need to run it again.
After MATLAB components are installed, you can run mslice.exe
Examples
Some examples are included with the program. These are .msp files used by mslice to store locations of various mslice parameters and references to the required data plus the data themselves. After installation you can look through these examples choosing them from Parameters window and selecting examples from /Data directory, located below your mslice installation folder.
Start Mslice
To stat mslice in Matlab, type >> mslice. To start the standalone version, double click the mslice.exe file. An example should appear in the GUI straight away. To look at other examples, click the parameters menu item and click load parameters. Then choose one of the other example .msp files to load.